Tascam DR-10X, Owner'S Manual

Page: 13 / 132

TASCAM DR-10X
13
Recording durations when using
microSD cards
The table below shows maximum recording times
on microSD/microSDHC cards of different capacities.
microSD/
microSDHC
card capacity
(hours:minutes)
24-bit/48kHz mono WAV
recording setting
DUAL REC
MODE off
DUAL REC
MODE on
1GB 2:04 1:02
2GB 4:08 2:04
4 GB 8:16 4:08
8GB 16:32 8:16
•
The recording times shown above are estimates.
They might differ depending on the microSD/
microSDHC card in use.
•
The recording times shown above are not
continuous recording times, but rather they
are the total possible recording times for the
microSD/microSDHC card.
Connecting with a computer
Connect the unit to a computer using the included
USB cable as shown in the illustration.
Computer
microB
USB cable
Whether the power is on or off, when connected, the
POWER/STORAGE
screen appears to allow selection
of bus power supply or USB connection with the
computer.
Use the
.
[
j
] and
/
[
k
] buttons to select
(highlight) the
POWER
or
STORAGE
item at the
bottom of the display, and press the
7’9
[ENTER]
button.
•
If
POWER
is selected, power will be supplied from
the USB port and the Home Screen will open.
•
If
STORAGE
is selected,
USB connected
will
appear on the display after the unit connects to
the computer without any problems.
The unit will be shown on the computer as a USB
device named “DR-10”.
Double-click the “DR-10” drive to open it and
show a list of the recording files, so you can
retrieve the desired files.