TASCAM DR-10L
13
Menu structure
Press the
MENU
button to open the Menu Screen. This list provides an overview of the various menu items.
Menu item
Summary
Setting items
(default value
underlined)
Explanation
01:MIC GAIN
Mic gain switch
L
/
ML
/
M
/
H
/
H+
Use to change the mic input sensitivity.
NOTE
If the
04:AUTO LEVEL
item on the menu screen is set to
ON
, it will be reset to
OFF
when the
01:MIC GAIN
setting is changed. When this happens,
AUTO LVL Cancel
will appear in a pop-up message.
02:LOW CUT
Low cut filter
OFF
/
ON
Turns the mic input low-cut filter on or off. The cutoff frequency is 120 Hz.
03:LIMITER
Input limiter
OFF
/
ON
This function prevents distortion when signals that are too loud are input suddenly. Turns this function on or off.
Distortion of sounds may occur when signals that are very loud are input even if the LIMITER function is activated.
In such a case, use the Menu Screen
01:MIC GAIN
item to lower the mic input sensitivity, or increase the distance
from the sound source.
04:AUTO LEVEL
Automatic level
adjustment
OFF
/
ON
When the input sound level is too low or too high, the recording volume will be increased or decreased automat-
ically to an appropriate level.
05:FS SAMPLE
Sampling
frequency
44.1kHz
/
48kHz
Use to set the sampling frequency setting.
06:BIT LENGTH
Quantization bit
depth
16bit
/
24bit
Use to set the quantization bit depth.
07:FILE TYPE
Recording file
type
MONO
/
POLY
Use to set the recording file type.
MONO
: Record mono files.
POLY
: Record stereo files (with the same data on both left and right channels).
NOTE
If the
08:DUAL REC
item on the menu screen is set to
ON
, it will be reset to
OFF
when the
07:FILE TYPE
setting is changed to
POLY
. When this happens,
DUAL REC Cancel
will appear in a pop-up message.
