Tascam DR-08, Owner'S Manual

Page: 56 / 112

56
TASCAM DR-08
or the sound source itself has low volume, set
the switch to
HIGH
.
When the
REC LEVEL
switch is set to
LOW
or
HIGH
, the unit automatically adjusts the
recording level for optimal recording, so you
cannot use the
Â
/
¯
keys to manually
adjust the recording level.
Setting the recording level manually
1 Set the
REC LEVEL
switch on the right side
panel to
MANUAL
.
2 Press the
REC
key to put the unit into
recording standby. The recording indicator
blinks and the recording screen appears.
REC indicator
3 Use the
Â
and
¯
keys to adjust the
input level. The input level is shown at the
bottom of the display.
NOTE
Press the •
ª
STOP key to end recording standby.
When in recording standby and during record- •
ing, even if the SPEAKER setting is set to ON, no
sound is output from the built-in speaker. If you
want to adjust the level or record while monitor-
ing the sounds, connect headphones to the unit’s
4 – Recording