40
TASCAM DR-05X
6 – Playback
Increasing the perceived overall sound
pressure to enhance listenability (LEVEL
ALIGN)
If the playback sound is very small and indiscernible, the
perceived overall sound pressure can be increased to
enhance listenability. (Level Alignment)
Operation from the MENU screen
1.
Press the MENU button to open the
MENU
screen.
2.
Use the + or – button to select (highlight) the
I/O
SETTING
menu item, and press the
7
button.
The
I/O SETTING
screen will open.
3.
Use the + or − button to select
LEVEL ALIGN
and press
the
7
button.
4.
Use the + and − buttons to set the
LEVEL ALIGN
function.
Options:
OFF
(default),
ON
5.
After completing the setting, press the
¤
(HOME) [
8
]
button to return to the Home Screen.
Operation from the Quick menu
1.
During playback when the Home Screen is open, press
the QUICK button to open the Quick menu.
2.
Use the + or − button to select
LEVEL ALIGN
and press
the
7
button.
3.
A screen to enable/disable the level alignment function
appears.
4.
Use the + or − button to select (highlight)
ON
, and press
the
7
button to enable the level alignment function.
Select (highlight)
OFF
and press the
7
button to disable
the level alignment function.
NOTE
The level alignment function might not have much effect
depending on the source of the sound (for example, a
music file that has already had sound pressure adjusted).
Using the jump function
During playback, you can jump backward or forward from
the current playback position by a set amount of time.
The same playback status will be retained after jumping.
The jump forward function can only be used during dictation
playback mode, overwrite recording mode and with the file
division function. Operation differs in these modes.
Use the
JUMP BACK
and
JUMP FWD
settings to set the
backward and forward times.
JUMP BACK
Options:
OFF
,
1sec
,
3sec
(default),
5sec
,
10sec
,
30sec
,
1min
,
5min
,
10min
JUMP FWD
Options:
OFF
,
1sec
,
3sec
,
5sec
,
10sec
(default),
30sec
,
1min
,
5min
,
10min
Operation when not using dictation playback
mode, overwrite recording mode or the file
division function
Jump back
During playback, press the
7
button to jump back from
the current position by the set
JUMP BACK
time.
Operation when using dictation playback mode,
overwrite recording mode or the file division
function
Jump back
During playback, press the
.
button to jump back
from the current position by the set
JUMP BACK
time.
Jump forward
During playback, press the
/
button to jump forward
from the current position by the set
JUMP FWD
time.
NOTE
When jumping back, if the amount of time from the
current playback position to the beginning of the file is
less than the set “JUMP BACK” time, playback will jump to
the beginning of the file. When jumping forward, if the
amount of time from the current playback position to
the end of the file is less than the set “JUMP FWD” time,
playback will jump to the end of the file and pause.
