TASCAM DP-03SD
29
4 – Preparations
Left side panel
USB
Computer
NOTE
Recorder functions cannot be used when the unit is
connected to a computer by USB.
Adjusting the contrast
The contrast of the display can be adjusted.
Follow the procedures below to adjust the contrast.
1 When the recorder is stopped, press the MENU button to
open the
MENU
screen.
2 Use the data wheel to select
PREFERENCE
, and press the
F4 (
¥
) button to open the
PREFERENCE
screen.
3 Use the F3 (
§
) and F4 (
¶
) buttons to select the Contrast
setting value, and use the DATA wheel to adjust the display
contrast.
The setting range is from
1
–
10
.
The default value is
5
.
Lower values reduce the display contrast while higher values
increase it.
Adjusting the contrast might make the display easier to read.
Its appearance differs depending on the angle from which it
is viewed, so adjust the contrast while the unit is in the actual
position in which it will be used.
4 After making the setting, press the HOME button to return
to the Home Screen.
