DA-6400/DA-6400dp
28
TASCAM DA-6400/DA-6400dp
New functions in firmware version 1.30
The following new functions have been added in firmware version 1.30.
0
DA-6400 Control iPad remote control app support added
0
TASCAM IF-AE16 AES/EBU interface card support added
0
Function added to synchronize with SMPTE timecode and play the current take
0
VAMPING mode added to repeat playback function modes
0
Function added to set the input and output signal routing for each individual channel
0
On/off setting added for NO SIGNAL error checking function
0
Function added that requires pressing and holding the button to stop recording
TASCAM DA-6400 Control iPad remote control app support added
The TASCAM DA-6400 Control iPad remote control app is now supported.
TASCAM IF-AE16 AES/EBU interface card support added
The TASCAM IF-AE16 AES/EBU interface card is now supported.
If installed in SLOT 1 or SLOT 2 of this unit, the following appears
on the
SLOT1
or
SLOT2
menu page.
CLOCK LINE
If the slot with the IF-AE16 card installed is selected to be the
clock master for the unit, this selects the signal line to use as
the clock master.
Options:
AES 1-2
(default),
AES 3-4
,
AES 5-6
,
AES 7-8
,
AES 9-10
,
AES 11-12
,
AES 13-14
,
AES 15-16
NOTE
i
When the slot with the IF-AE16 card installed is selected to be
the clock master, you can also set the
CLOCK LINE
item on
the
CLOCK
screen that opens from the
GENERAL
page
CLOCK
MASTER
item. Moreover, if the slot with the IF-AE16 installed
is selected to be the clock master, you can also change the set-
ting by moving the cursor to
APPLY
and pressing the MULTI
JOG dial.
i
If the
SRC
item is set to
ON
for a signal line, it cannot be se-
lected as the master clock In this case, the following pop-up
window appears. A confirmation pop-up message appears.A
confirmation pop-up message appears.
