Tascam CD-A550mkII, Owner'S Manual

Page: 16 / 48

16
TASCAM CD-A550MKII
3 – Menu
This unit uses a menu system to make various settings
and use certain functions.
Menu structure
This unit’s menu system includes the following menu
items.
Menu
No.
Item Function
1 PLAY MODE Playback mode selection
2 AUTO CUE Set auto cue function
3 AUTO READY Turn auto ready function ON
and OFF
4 AUTO SPACE Turn auto space function ON
and OFF
5 FOLDER PLAY Turn folder playback function
ON and OFF
6 INCREMENTAL
PLAY
Turn incremental play function
ON and OFF
7 RESUME PLAY Turn resume playback ON and
OFF
8 PROGRAM EDIT Edit the program
9 TAPE EDIT Use the TAPE EDIT function
10 TRAY LOCK Turn tray lock function ON and
OFF
11 EOM DISPLAY Set EOM display function
12 TAPE INPUT
SOURCE
Select input source
13 COMMON OUT Select COMMON OUTPUT
source
14 MONO OUT Turn mono output function ON
and OFF
15 DUBBING LEVEL Set record level during CD
dubbing (fixed/volume)
16 FL DIMMER Set the display brightness
17 VERSION Show version information
18 MOTOR TIME Show motor operation time
19 DEFAULT Restore the unit to its default
settings
Using the menu
Follow the basic procedures below to use the
menu system to make settings. However, to use the
PROGRAM EDIT and TAPE EDIT items, which are
more complicated, see “Programmed playback” on page
26 and “Using the TAPE EDIT function” on page
39.
Moreover, selecting the VERSION and MOTOR TIME
items causes information to be shown on the main
display, but there are no settings to be made.
1 When in standard display mode, press the
MENU
key on the main unit or the remote control.
This puts the unit in menu mode, and the main
display shows menu item selections. The menu item
that was last selected the previous time that the menu
was used is shown.
NOTE
Press the MENU key when the menu item selection is
shown to return to the standard display.