TASCAM CD-200i
33
If you have problems with your system, look through this
chart and see if you can solve the problem yourself before
calling your dealer or TEAC service center.
ª
No power
e
Is the unit’s power plug completely inserted into a
working power outlet?
ª
Remote control doesn’t work.
e
Check to see if the batteries are properly installed in the
remote control.
e
If the batteries are dead, change the batteries.
ª
No sound
e
Check the connection to the monitor system again.
e
Check the volume and settings of the amplifier.
ª
There is unwanted noise.
e
Are the connecting cables all properly connected and
functioning?
ª
A CD cannot be played back.
e
If you are using a data CD with MP3 files, confirm that
the file bit-rates are compatible with this unit.
e
Is the disc scratched or dirty?
ª
The files on a data CD cannot all be played
back.
e
Is the unit in folder playback mode?
ª
The iPod cannot be connected to the iPod
dock.
e
Confirm that the correct dock adapter has been inserted into
this unit’s iPod dock.
e
Confirm that no debris or dust is stuck to this unit’s iPod
dock and then try to connect the iPod again.
ª
The iPod cannot be controlled.
e
Is the iPod connected correctly with the unit’s dock
connector?
e
Is the unit’s power plug completely inserted into a
working power outlet?
e
Is the iPod selected as the output source?
e
Unlock the HOLD switch on the iPod.
e
Remove the iPod from the iPod dock once and then wait a
moment before reconnecting the iPod.
e
Updating the iPod software frequently resolves problems.
Please visit Apple’s website and check for the latest information.
ª
There is no sound or video from the iPod.
e
Is the iPod playing?
e
Is the iPod connected correctly with the unit’s dock
connector?
e
Is the unit’s power plug completely inserted into a
working power outlet?
e
Is the video or S-video cable correctly connected?
e
Is the television input set to the video input jack to
which this unit is connected?
e
Are the iPod video output and television output settings
matched correctly (NTSC or PAL)?
7 − Troubleshooting
