1- Introduction
1
TASCAM CC-222SL
2 – Features of the CC-222SL
w
AUTO SPACE key
Automatically adds a space of about
four seconds between disc tracks on playback.
e
DISPLAY key
Changes the time display for the disc
recording and playback.
r
FADER key
Use this key to perform automated fade-
in and fade-out when recording to disc. The time is set
using menu items.
t
PLAY MODE key
Allows the selection of either con-
tinuos, single, programmed or random playback.
y
INTRO CHECK key
Allows the first 10 seconds of
every track on a disc to be played.
u
REPEAT key
Sets the repeat mode (single track, or disc
repeat playback) on and off.
i
A-B key
Use this key to set the start and end points of a
repeat loop and to cancel such a loop.
o
MENU key
Repeated presses of this key shows differ-
ent menu items.
p
ENTER key
Used to confirm menu settings.
a
Number keys (0 through 10, +10, and CLEAR key)
Use number keys to enter track numbers for disc playback.
The
CLEAR
key cancels the last track entered.
s
SEARCH
Ô
/
keys
Used for “fast forward” and
“fast reverse” through a disc.
d
CD SKIP
Â
/
¯
keys
Used to select tracks or menu
parameter values.
f
CD REC key
Places the disc in record standby mode and
performs manual track incrementing while recording.
g
CD REC MUTE key
During disc recording, press-
ing this key inserts a silence of about four seconds and
pauses recording.
h
FINALIZE key
Used when finalizing recordable discs.
j
ERASE key
Used when erasing data from CD-RW discs.
k
SYNC REC key
Turns synchronized recording of the
disc recorder on and off.
l
CD STOP key
Stops CD playback or disc recording.
;
CD PAUSE key
Pauses or resumes CD playback or
recording (starts recording from record pause mode).
z
CD PLAY key
Starts CD playback or recording (from
record standby mode).
RC-222SL Remote control unit
2
3
1
4
5
6
8
0
7
9
q
w
e
r
t
y
u
i
o
p
a
s
d
f
g
h
j
k
l
;
z
1
Tape RESET key
Resets the tape counter to zero.
2
Tape RTZ key
Returns the tape to the zero position.
3
Disc Eject key
Ejects the loaded disc.
4
Tape
∆
/
˚
key
Fast-rewinds or fast-forwards the
tape. If the tape is already in playback mode, these act
as the search keys.
5
Tape REC MUTE key
When recording to cassette and
this key is pressed, the sound is muted for about four
seconds, and the unit enters record standby mode.
6
Tape REC key
When stopped, pressing this key enters
recording standby mode.
7
Tape STOP key
Stops the current tape transport operation.
8
Tape PAUSE key
Stands by for tape playback or
recording. Pressing this key again resumes the operation.
9
Tape
˙
PLAY key
Starts tape playback or recording,
from right to left.
0
Tape PLAY
¥
key
Starts tape playback or recording,
from left to right.
q
CONT PLAY key
Use this key to turn continuous play-
back (alternating between disc and cassette) on and off.
