Tascam CC-222SL, Owner'S Manual

Page: 13 / 36

1- Introduction
TASCAM CC-222SL
1
2 – Features of the CC-222SL
Display
* ( )
Q W E R YU
I OP
A
SD F G H J K L :Z X
T
This display shows various types of operation information,
including CD disc information, deck operation modes, and
menu status.
(
Tape PLAY Lights when a tape is being played back or
recording.
) ˙/¥
(Tape-running indicator) Shows the direction of a
tape during playback or recording.
Q
Tape PAUSE (
π
) Lights when the unit is in standby
mode for tape playback or recording.
W
Tape REC
Lights during tape recording or recording
standby mode.
E
Tape Counter display The tape counter value is incre-
mented when the tape is moving from left to right, and
decremented when it moves from right to left (See “Tape
counter” on page 32 for more details).
R
Tape Level meter
Displays the playback level and the
input level of the source device for recording operation.
T
TAPE, CD In the CD-TAPE CONT PLAY mode (con-
tinuous CD/tape playback), on of these will flash during
playback.
Y
INPUT 2 This is always displayed except when record-
ing with the PHONO key.
U
LINE 2, DISC display
Shows the different sources
available for
INPUT 2
(Tape deck).
liNe 2
: a signal source is connected to LINE INPUT 2 .
Disc
:
a signal source is connected to internal CD drive.
I
DUB 1, 2
When dubbing a tape to a CD-RW, the indica-
tor “
Dub 1
” lights up. When dubbing a CD-RW to a tape,
indicator “
Dub 2
” lights up.
O
Counter display Either
TOTAl
or
ReMAiN
is lit. When
both indictors are off, the time mode is set to show the
elapsed time of the current track.
P
Disc information display NO TOC
Lights when a disc
does not contain TOC (Table of Contents) data.
CD
,
CD-R or CD-RW lights up when a disc with TOC data
is loaded.
A
CD PLAY (
¥
) Lights during disc playback.
S
CD PAUSE
(
π
) Lights during playback or recording
standby mode.
D
CD REC Lights during disc recording or recording
standby mode.
F
SYNC
Lights when the SYNC recording mode is on.
G
REPEAT, A-B display
When the Repeat function is
on, “ RePeAT ” is lit. When the A-B Repeat function is
on, “
RePeAT
” and “
A-b
” are lit. “
A-b
” also blinks until a
“B-point” is entered.
H
SINGLE, RANDOM, PROGRAM display Depending
on the playback mode selected. When all the indicators
are off, Continuous playback mode is on.
J
Character display
Disc or track information, menu,
message, time, and operation status are displayed.
K
CD Level meter Displays the playback or input source
level when recording.
L
MUSIC CALENDER
Available tracks for playback light
up; played back tracks disappear from the screen. When
there are more than 20 tracks available for playback, the
“
OVeR ” indicator lights up.
:
A·SPACE Lights when the Auto Space function is on.
Z
A·TRACK
Lights when the Auto Track function is on.
The indicator blinks when Time mode is selected.
X
INPUT 1
This is always displayed except when record-
ing with the PHONO key.
C
OPTICAL, COAXIAL, LINE 1, PHONO, TAPE display
Shows the different sources available for INPUT 1 (CD
drive).
OPTicAl
:
Input source is connected to
OPTICAL
.
cOAXiAl
: Input source is connected to COAXIAL .
liNe 1 : Input source is connected to LINE 1 .
PhONO
:
Input source is connected to
PHONO
.
TAPe
: Input source is connected to internal tape deck.