Tascam BD-MP1MKII, Owner'S Manual

Page: 44 / 224

44
TASCAM BD-MP1MKII
During playback, video is disrupted, does not appear or has
a strange color.
o
When searching forward or backward, for example, the video
might appear a little irregular.
o
Is a mobile phone or other device that emits radio waves
being used nearby?
o
Has a disc that is not supported by the unit or that has a differ-
ent region code been loaded in it.
o
Does the TV support HDCP?
o
With the power on, try disconnecting the HDMI cable from
the TV and this unit and then reconnecting it.
o
Use a different HDMI cable and reconnect them.
o
Check the “Display Settings” setting.
Subtitles do not appear.
o
Subtitles cannot be turned on for titles without subtitle data.
No audio is output from the AV amplifier.
o
Confirm that the AV amplifier is turned on.
o
Confirm that the AV amplifier output is correct.
o
Confirm that the AV amplifier supports bitstream or LPCM.
o
Check the volume of the AV amplifier.
The camera angle cannot be changed.
o
Angles cannot be changed for BD-Video or DVD-Video that
does not have multiple angles recorded.
o
Camera angles can only be changed for scenes that have it
enabled.
High definition resolution cannot be viewed.
o
Confirmed that the title recorded in high definition.
o
Does the TV connected to the unit support high definition?
HDMI device control does not work.
o
HDM device control only works when the necessary settings
have been made for this unit and the other supported device.
o
When HDMI device control is enabled, it will be disabled if the
power plug of this device or the HDMI cable is disconnected.
Cannot connect to a network.
o
Confirm that the modem and router are turned on.
o
Confirm that the modem and router Internet indicators are lit.
o
Check the unit’s Network settings.
o
Confirm that this unit and router are connected correctly.
o
Confirm that the router DHCP function is enabled.
A password was forgotten.
o
If it has been forgotten, contact TASCAM customer support
service.
Specifications
General
Supported media
Disc media
Blu-ray BD25, BD50, BD-ROM, BD-R(SL, DL), BD-RE(SL, DL)
DVD DVD-ROM, DVD-R(SL,DL), DVD-RW, DVD+R(SL,DL),
DVD+RW
CD CD-DA, CD-R, CD-RW
o
SL indicates single-layer discs and DL indicates double-layer
discs
o
This unit can play only BD and DVD-VIDEO that has the same
region code as shown on the label on its chassis. It can also
play DVD-VIDEO that is ALL.
Disc formats
Blu-ray BDMV, BDAV
DVD DVD-Video, DVD-VR, AVCHD
o
Blu-ray 3D supported
Supported file formats*
Video ASF, MPG, AVI, 3GP, DAT, MKV, MOV, M2TS, OGM, TP,
TS, MP4, WMV
Audio WAV, MP3, WMA, AAC, FLAC, APE
Picture JPEG, GIF, PNG
Supported
subtitle file
formats SUB, ASS, IDX+SUB(IDX+SUB)
* USB flash drive and SD card formats must use FAT16, FAT32, exFAT or NTFS file
systems.
Audio
BD/DVD/USB/SD
Sampling
frequency 44.1 k/48 k/64 k/88.2 k/96 k/176.4 k/192 kHz
Bit length 16/24 bit
CD
Sampling
frequency 44.1 kHz/48 kHz
Bit length 16/24 bit
MP3/WMA
Sampling frequency 32 k/44.1 k/48 kHz
Bitrate MP3 112 kbps - 320 kbps
WMA 48 kbps - 192 kbps
Outputs
HDMI output
Connector HDMI 19pin Type A
Resolution 480i/576i/480p/576p/720p/1080p
Aspect ratio 16:9 Full, 16:9 Normal, 4:3 Pan & Scan, 4:3
Letterbox
Video format NTSC, PAL, Multi
HDMI signal system RGB PC level, RGB Video level,
YCbCr(4:4:4), YCbCr (4:2:2)
Digital Audio output
COAXIAL
Connectors RCA pin jacks
Format IEC60958-3(S/PDIF)
Output impedance 75 Ω or lower