TASCAM BD-MP1MKII
37
6.
Change the size.
Use the
k
and
j
cursor buttons to select the Size, and
press the ENTER button to confirm. The size options (Large/
Small) will be shown.
Use the
k
and
j
cursor buttons to select “Large” or “Small”,
and press the ENTER button to confirm.
NOTE
Different sizes cannot be selected for speakers in a pair.
7.
Change the trim.
Use the
k
and
j
cursor buttons to select “Trim”, and
press the ENTER button to confirm. This opens the Trim
Adjustment Screen.
C example
Use the
l
and
;
cursor buttons to change the value, and
press the ENTER button to confirm.
Adjustment range: 0 – ±10 dB (in 0.5dB increments)
NOTE
For pairs, only values that show a
g
or
t
cursor can be
changed. Use the
k
and
j
cursor buttons to change them.
8.
Change the delay.
Use the
k
and
j
cursor buttons to select “Delay”, and
press the ENTER button to confirm. This opens the Delay
Adjustment Screen.
C example
Use the
l
and
;
cursor buttons to change the value, and
press the ENTER button to confirm.
Adjustment range: 0 – 1000 cm (in 5cm increments)
NOTE
o
The unit is centimeters. Measure the distances fLrom
each speaker to the listing point, calculate their differ-
ences and use these values. (The delay time is 29μsec/
cm.)
o
For pairs, only values that show a
g
or
t
cursor can be
changed. Use the
k
and
j
cursor buttons to change
them.
Test Tone
Test tones (white noise) can be output from each speaker to con-
firm their connections and adjust their trim values. They can also
be used to change sizes and delay values.
1.
On the Home Screen, select Settings > Audio settings >
Speaker settings > Test Tone. This opens a Speaker Setting
Screen with the currently set channel configuration.
Example with 7.x and C+LR+LsrRsr settings
This outputs a test tone from the speakers in counterclock-
wise order starting from the L speaker.
Example:
when set to 7.x and C+LR+LsrRsr, tones will be out-
put in this order: LwCwRwRsswRsrwLsrwLsswL.
2.
Press the ENTER button while a speaker is highlighted yellow
to enable changing its speaker size, trim and delay settings.
The current size, trim and delay settings for the highlighted
speaker and its paired speaker will be shown at the bottom
left of the screen.
3.
Use the same procedures as for channel configuration to
adjust the size, trim and delay.
NOTE
The test tone cannot be used to adjust the subwoofer.
Summary of Contents for BD-MP1MKII
Page 222: ...222 TASCAM BD MP1MKII...
