Tascam BD-MP1MKII, Owner'S Manual

Page: 29 / 224

TASCAM BD-MP1MKII
29
NOTE
o
When the repeat function is enabled, playback will start auto-
matically when a disc is loaded. For this reason, be careful
during the following operations.
o
Making settings on the HOME screen
o
Playing files on an SD card/USB flash drive
o
Automatic playback is not supported for SD cards or USB flash
drives.
Playing video discs
o
If a disc that has never been played before is loaded, it will
start playing from the beginning.
o
If Last Memory (HOME screen > Settings > System) is set to On
(the default is On), when discs that have been played before
are loaded, they will resume playing* from the position where
they were last stopped.
* This only works with purchased or rental video discs. Moreover, the unit can
save positions for five discs maximum with this function. When the total num-
ber of discs would exceed five, the record for the disc played least recently will
be replaced by a record for the most recent disc.
Operating from disc top menus and pop-up menus
When video discs have menus or pop-up menus, they can be
shown and a variety of operations are possible.
(The contents of menus and pop-up menus depend on the pro-
gramming of the discs.)
o
To show the title menu, press the TOP MENU button. If this is
done when playing or paused, playback will stop.
To show the title menu without stopping playback when
playing or paused, press the TITLE/POP UP button.
To move between items in the title menu use the cursor but-
tons, and press the ENTER button to confirm.
Pausing playback
To pause playback, press the
9
button.
Press the
9
button again or press the
7
button to resume play-
back from the stopped position.
Stopping playback
To stop playback, press the
8
button.
Press the
7
or ENTER button to start playback from the stopped
position.
NOTE
o
Unlike when paused, whatever is shown on the monitor will
disappear.
o
During repeat playback, the repeat mode will be cleared.
Searching backward/forward
Use the
m
/
,
buttons to search backward/forward.
Pressing the
m
/
,
button again will change the search
speed up to five levels.
Pressing it again will return to ordinary playback.
When searching backward/forward in a disc, press the
9
button
to pause playback.
Pressing the
9
button again will resume playback.
Skipping to the previous or next chapter/
track
Press the
.
/
/
button to skip to the previous/next chapter/
track.
o
When playing, paused or searching backward/forward, press
the
.
/
/
button to skip to the previous/next chapter/
track and resume playback.
o
To return to the beginning of the currently playing chapter/
track, press the . button once.
(However, if the current chapter/track is playing back or
paused within a few seconds of its beginning, this will move
to the previous chapter/track and resume playback.)
Repeating playback of part of a scene or
track
During media playback, press the A-B button to set a desired
interval (between A and B points) and play it back repeatedly.
(In this explanation, “scene” is used, but it also applies to “tracks”
when using audio files.)
NOTE
o
This repeat playback function is different from the automatic
playback repeat function.
o
The repeat playback function will be disabled if the power
is turned off, playback is stopped or the HOME screen is
reopened.
1.
Press the A-B button at the point in the scene were repeat
playback will start. The starting point “A-” will appear at the
top of the monitor.
2.
Next, press the A-B button at the point in the scene were
repeat playback will end. The starting and ending points
“A-B” will appear at the top of the monitor, and repeat play-
back will continue between these points.
3.
During repeat playback, press the A-B button again to end
repeat playback and continue ordinary playback.
(Not all video discs support this function.)
Repeating playback of a chapter, title or
track
Press the REPEAT button to enable repeat playback mode. The
currently playing chapter, title or track will play repeatedly. Press
this button repeatedly to change the repeat playback mode.
NOTE
o
This repeat playback function is different from the automatic
playback repeat function.
o
The repeat playback function will be disabled if the power
is turned off, playback is stopped or the HOME screen is
reopened.
Video discs
o
During chapter repeat playback, playback starts at the begin-
ning of the current chapter. (The
icon appears at the top
of the monitor.)
o
During title repeat playback, playback starts at the beginning
of the current title. (The
icon appears at the top of the
monitor.)
o
During all repeat playback, playback starts at the beginning
of the video file. (The
icon appears at the top of the
monitor.)