18
Recording (continued)
Continuous recording
This function allows you to make uninterrupted recordings on both
sides of two tapes.
1
Load cassette tapes for recording into the TAPE 1 and
TAPE 2 compartments.
Side “A” facing you
2
Set the REV MODE switch to the
p
(CONT REC/PLAY)
position.
3
Press the TAPE 1 deck’s RECORD (
K
) key.
The deck enters the record-pause mode.
J
and
will light
on the display. Now adjust the recording level and any other
settings, as required.
4
Check the recording direction.
If an indicator is lit which points in the direction opposite to
the one desired, change the direction by pressing the opposite
direction
PLAY
(
h
or
y
) key.
NOTE
Be careful not to press the
PLAY
(
h
or
y
) key whose arrow
points in the same direction as the indicator. Doing so will start
recording.
Recording is done in this order:
TAPE 1 Side “A”
x
Side “B”
x
TAPE 2 Side “A”
x
Side “B”
You can start recording from side “B” of TAPE 1. But if you do so,
side “A” of this tape is not recorded: when recording reaches the
end of side “B”, the TAPE 2 deck starts recording.
NOTE
The TAPE 2 deck always starts recording from side “A”.
5
Start recording.
Recording starts when you press the
PAUSE
key or the
PLAY
(
h
or
y
) key whose arrow points in the same direction as the
indicator on the TAPE 1 deck.
When recording is finished on the TAPE 1 deck, the TAPE 2 deck
automatically starts recording.
NOTE
The transition from TAPE 1 to TAPE 2 takes several seconds.
A
To stop recording
Press the
STOP
(
H
) key of the deck which is currently recording.
