6
TASCAM US-2x2/US-4x4
3 – Installation
System requirements
For the latest information about supported operating systems,
visit the TEAC Global Site (
http://teac-global.com/
).
Windows
8
Supported operating systems
Windows 10 32-bit
Windows 10 64-bit
Windows 8.1 32-bit
Windows 8.1 64-bit
Windows 7 32-bit SP1 or later
Windows 7 64-bit SP1 or later
(Windows 8, Windows Vista and Windows XP are not
supported)
8
Computer hardware requirements
Windows computer with a USB 2.0 port
8
CPU/processor speed
2 GHz or faster dual core processor (x86)
8
Memory
2 GB or more
CAUTION
Operation of this unit was confirmed using standard
computers that meet the above requirements. This does
not guarantee operation with all computers that meet the
above requirements. Even computers that meet the same
system requirements might have processing capabilities
that differ according to their settings and other operating
conditions
Mac OS X
8
Supported operating systems
macOS Sierra (10.12 or later)
OS X El Capitan (10.11 or later)
OS X Yosemite (10.10 or later)
OS X Mavericks (10.9.1 or later)
OS X Mountain Lion (10.8.4 or later)
8
Computer hardware requirements
Mac with a USB 2.0 port
8
CPU/processor speed
2 GHz or faster dual core processor
8
Memory
2 GB or more
Apple iOS devices
8
Supported operating systems
iOS 7 or later
Supported audio drivers
Windows: ASIO2.0, WDM, MIDI
Mac: Core Audio, Core MIDI
Installing the dedicated software
To use this unit with a computer, dedicated software must be
installed on the computer.
The dedicated software might be updated at any time.
Download the latest software for the operating system you are
using from the TEAC Global Site (
http://teac-global.com/
).
o
On a Windows computer, this will install the Windows driver
and Settings Panel application.
o
Installing the dedicated software on a Mac will install only
the Mac Settings Panel application.
The standard OS driver will be used.
o
When using this unit with an iOS device, the standard OS
driver will be used, so there is no need to install dedicated
software.
CAUTION
Before starting to install software, quit other applications.
Installing the Windows dedicated software
NOTE
• Complete installation of the Windows dedicated software
on the computer before connecting the unit to it with the
USB cable.
• If you connected the unit to the computer using the USB
cable before installing the Windows dedicated software
and the “Found New Hardware Wizard” launched, close the
Wizard and disconnect the USB cable.
8
Windows dedicated software installation
procedures
1.
Download the latest Windows dedicated software for the
operating system you are using from the TEAC Global Site
(
http://teac-global.com/
) and save it on the computer to be
used with the unit.
2.
Uncompress the saved software (zip file) on the computer
desktop or another location.
3.
Double-click the “TASCAM_US-2x2_US-4x4_Installer_x.
xx.exe” file in the folder that appears after uncompression to
automatically launch the installation software.
CAUTION
If you open a zip file without decompressing it and double-
click the
“TASCAM_US-2x2_US-4x4_Installer_x.xx.exe”
file in
the folder that opens, installation will not start. Right-click
the zip file and select
“Extract All”
, for example, to decom-
press it and then try again.
4.
When a Security Warning or User Account Control screen
appears, click the “Yes” button.
5.
When the Setup Wizard screen appears, click the “Next”
button.
