Step three
Step one
Step two
RancheR latch
Step five
Step four
Step Six
Make sure Latch Assembly
is flush against the opening
end of the gate.
Attach bolts
to the upper
and lower slots
allotted for
them. Make
sure the bolts
are secure and
tight.
Drill 1/4” holes using
the latch receiver as
a template. Insert and
secure bolts with
crescent or socket
wrench. Slide latch into
receiver.
Attach Latch Assembly to
the opening side of the gate.
Secure tube anchorplates to
the two rails of the gate.
Unbolt Lever Latch from the gate and move it from it’s
shipping position (bars 3 & 4) on the gate to it’s
installation position (bars 2 & 3).
Extend latch bolts to determine where to position latch
receiver.
assembly instructions
