READ ME FIRST FOR
FIRST TIME INSTALLATION
ATTENTION !
Targus Wireless RF Mouse Users
Before You Begin
After your computer detects the USB receiver and the driver
software is installed, you must establish a communications link
between the mouse and its receiver BEFORE you can use the
mouse. To establish this link, you need to set the identification code
so that the mouse works properly. To do this, follow the
instructions for your mouse model.
NOTE: This addendum replaces the section titled “Establishing a
Communications Link (All RF Mouse Models)in the supplied
user’s guide.
Mouse Model PAUM005
Establishing a Communications Link
Make sure that your computer is turned on and has detected the
USB receiver before you establish a communications link.
1
Press and release the link button on the receiver.
030704 PAUM006Add2r_eng.fm Page 1 Friday, July 4, 2003 3:40 PM
