Targa LSL 10 A3, User Manual And Service Information

Page: 10 / 58

LIVARNO LUX LSL 10 A3
8 - English
Wire Symbol Designation
Black or brown L Phase
Blue N Neutral
Yellow/green Earth conductor

Then screw the power cable [5] with the rubber seal tightly in the cable
gland [4].

Close the junction box [2] by screwing the cover again tightly with the
four screws that you previously removed. When closing the junction box
[2], ensure that the sealing ring lies correctly in the groove. Otherwise, IP
protection is not guaranteed.

Then attach the LED spotlight to the mounting bracket [3]. To do so, use
the previously removed screws and washers. Make sure that the spring
washers are located between the LED spotlight [1] and the mounting
bracket [3]. The other washers must be between the screw head and the
mounting bracket [3].
First use
After you have installed the LED spotlight as previously described, you can
connect the circuit again. You can now switch the LED spotlight on and off
via the corresponding light switch of your home lighting system.
Cleaning / maintenance
Maintenance
The light bulb of the LED spotlight is a long-lasting LED. It cannot be
replaced and does not require maintenance.
The light source of this light cannot be replaced; when the light source has
reached the end of its service life, the entire light must be replaced.
Cleaning
Ensure that no liquid can penetrate the
housing. There is a risk of an electric shock.
To clean the LED spotlight, use a soft, dry cloth and never use any solvent or
cleaner that would corrode the plastic materials. Use a slightly damp cloth
for more stubborn dirt.