11
Make one of the following connections, depending on
the capabilities of your existing equipment.
Tips:
•
Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the DVD/CD Receiver. Use one of the connections
described below.
•
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
Caution
– Make sure the DVD/CD Receiver is connected directly
to the TV. Select the correct AV input on your TV.
– Do not connect your DVD/CD Receiver to TV via your
VCR. The DVD image could be distorted by the copy
protection system.
Video connection
Connect the MONITOR OUT jack from the DVD/CD
Receiver to the VIDEO IN jack on the TV using the
video cable supplied (V).
S-Video connection
The video signal is saperated into luminance (Y) and
colour (C) signals for the S-VIDEO jack. The S-VIDEO
signals enables high-quality colour reproduction. If your
video component has an S-VIDEO output, we recommend
to use it.
Connect the S-VIDEO OUT jack on the DVD/CD
Receiver to the S-VIDEO IN jack on the TV using the
S-Video cable (S).
Tip:
If you want to connect the DVD/CD receiver to a TV
with SCART socket, use the SCART-VIDEO adapter
(T).
If your TV has got only Scart input use the Scart
adapter for connection. In case that your TV supports
S-Video at Scart, you should use the S-Video to Scart
connection. Otherwise you have to use the Video to
Scart connection. If you connect both (S-Video & Video
to Scart Adapter) simultaneous, it could be that some
interferences are visible in picture. In that case you
have to remove the connection you do not need.
TV Connections
Installation and Setup
Installation and Setup
