CR 1.0 A1
English - 183
Troubleshooting
You can solve most common problems yourself using the table below. If the problem persists after
checking the suggested solutions, please contact our Service Hotline (see page 185). Do not
attempt to repair the product yourself. Do not open the housing of the Dashboard Camera or of
the car charger as they contain no serviceable parts.
Error Solution
Unable to power the Dashboard
Camera on.
The battery is empty. Recharge the battery.
The Dashboard Camera suddenly
powers off.
The battery is empty. Recharge the battery.
Auto Power Off is enabled. Check the setting (see page
172).
The Dashboard Camera fails to
respond and cannot be switched
off.
Press the Reset switch (1). To do so, open the protective
cover (4) and slide the Reset switch (1) to the opposite
location using a pointed object. Wait for a few seconds
and then slide the Reset switch (1) back to the original
position. The Dashboard Camera should then work as
normal again.
The recordings show stains or
shadows.
Clean the Dashboard Camera lens with a soft, dry, lint-
free cloth. Do not use any detergents or chemicals.
The "SD CLASS6" message is
displayed.
The inserted microSD memory card must support at least
Speed Class 6. If necessary, insert a faster microSD
memory card.
Summary of Contents for CR 1.0 A1
