Tarana Wireless, Inc. ©2021. All rights reserved.
RN Installation Guide vIG_RN_CBRS_2021-08
—
8
Preparation
Use the following checklists to ensure you have all the required items before
beginning a Tarana RN installation. Verify the contents of the Tarana supplied
hardware.
Tools
#2 Phillips tip screwdriver
8mm hex socket wrench
Torque wrench
Crimping tool (not shown)
Laptop with admin rights (not shown)
Figure 1: Tools
Customer Supplied Equipment
Grounding wire per local electrical code with attachment tapped for an
M5 screw
Ethernet cable - shielded CAT5e/CAT6, outdoor-rated
Ethernet cable - shielded CAT5e/CAT6, indoor-rated
Note: The total length of both Ethernet cables must not exceed 100m
(328 ft).
Figure 2: Customer Supplied Equipment
