*Nominal power with 1KHz sinusoidal signal and 4 Ohms resistive load. (Measured according to IEC 60268-3 Sound
Equipment, Part 3: Amplifiers).
Minimum Output Impedance:
Number of Channels:
Maximum power
Input sensitivity:
Input Impedance:
Crosstalk
THD+N
Signal-to-Noise Ratio:
Stand-by consumption
Protection
Fuse
Maximum consumption
Supply voltage
Frequency Response
Weight:
Dimensions (W x H x D):
2.35Kg (5.17lb)
775mV (0dBm)
10K Ohms unbalanced
>100dB
3.5W
02
20Hz ~ 20KHz (±0.05dB)
400W RMS ( 2 x 200W RMS) IEC 60268-3*
<0.06%
120/240 VAC (automatic bivolt)
Short circuits outputs and low impedance
4 Ohms
6A
482 x 55 x 180mm (18,98" x 2.17" x 7.09")
>68dB
500W
Taramps reserves the right to modify the contents of this document at any time without prior notice and does not have the obligation to apply the changes in units
which were previously produced.
10
Technical features
