18
I.
Inspection of the tractor hydraulic
Raise the baler using the tractor hydraulics.
II.
Inspection of machine hydraulic system.
a) Inspection of machine hydraulic system for gate opening and closing.
Warning
•
Bystanders must be away from the machine when gate is opened.
Warning
•
By standers must be away from the machine when gate is opened.
Lock gate by the stop valve when the machine is checked in the gate opening situation.
Caution
•
If the hydraulic hose is damaged or hydraulic fitting is loose, it will be cause of injuring by leaking
high pressured hydraulic oil or suddenly dropping of the machine.
Replace damaged hydraulic hose or fittings and fittings loosen fittings.
(1)
Turn lever of stop valve for gate opening and closing to “Opening” position.
(2) Start the tractor engine and engage PTO to rotate PTO shaft and then open gate by
operating lever package.
(3)
Turn lever of stop valve to “close” while pulling the lever of the power package at full
opened gate position.
