Tapco Link.MIDI, Owner'S Manual

Page: 6 / 16

6
Hookup Diagram
���
������ �����
� � � �
•• •• • • • •• •• •• •• •• •• •• •• •• •• •• •• • • •• • •• •• •• •• • • •• •• •• •• ••
•• • • • • •• •• •• •• •• • • •• •• •• •• •• •• • • •• •• •• •• •• •• •• •• •• •• •• •• ••
��
���
� � � �
�����
����
����
������������������
�������������
�������� ����
������ �����
� � � �
��������������
��������
���������������
����������
������
����������
Typical MIDI Studio Setup
This diagram demonstrates a typical MIDI studio setup. The USB
port on the Link.MIDI 4x4 is connected to a computer running MIDI
sequencing and music production software. The MIDI ports on a
keyboard are connected to I/O 1 on the Link.MIDI 4x4, and a MIDI
synthesizer is connected to I/O 2. You might connect a MIDI control
surface to I/O 3, which can be used to control various functions in the
software application. I/O 4 could be used for connecting a second MIDI
synthesizer, drum pads, or a wind controller.