PACKAGING CONTAINS
CD
2
1
Network camera
4
Screws
3
Anchors
6
Power adaptor
5
Allen key
CAMERA INSTALLATION
1
IR light LED
2
Lens
3
IR light sensor
4
Bracket fix release bolt
5
Front camera opening
6
LAN/POE connection
7
Audio in (white) out (red)
8
Alarm out (orange/purple)
9
RS485 (white-yellow/green)
10
11
DC power in
CAMERA DESCRIPTION
1
Select the installation area and mark the screw drill location, fix
the camera to the ceiling or wall depend the requirement, fix the
screws tightly.
2
Unscrew the bracket bolts in order to set the camera right
position, the different bolts can help the cameras to tilt, turn
and even set parallel line.
3
In order to have access to the camera inner part to set the lens
focus and zoom distance please turn anticlockwise direction the
camera front ring, hold the camera tightly and turn it. Once the
lens is settled close the housing clockwise tightly to avoid water
and dust get into the camera.
4
Once the camera front ring is open you would find access to the
lens lavers, if the camera has remote focus there would not be
lavers as the setting of the zoom and focus is motorized.
3
1
2
4
5
THAL/R400 Series Quick Installation Guide
CLOSE
OPEN
7
Drill template
6
8
9
10
11
7
Alarm (red/black)
