FAULT CONDITION
>>
"Passed" or "arm turned" information is not received after passing
Reason:
Connections may be broken or incorrect. The 'XL9 terminal' of the control card may be
defective.
Solution:
The connections should be checked manually and visually. If the control card is
defective, it should be replaced.
>>
The turnstile allows a continuous pass to one direction.
Reason:
It may be running in one-way free mode. The solenoid cable or spring may be displaced.
Solution:
The "3rd" and "4th" dip switch positions of the control card should be checked. If there
is a displaced spring or cable, it should be replaced. If it doesn't work, it should be replaced.
>>
The turnstile works properly with all its functions, but the guiding LEDs do not turn on.
Reason:
LED cards or LED cables may be defective. The motherboard may be defective.
Solution:
If the LED card is defective, it should be replaced. If the LED cable is defective, it
should be replaced. If the card is defective, it should be replaced.
TANSA TECHNICAL SERVICE CONTACT
Phone
+90 (216) 561 96 71 - 72 -73
E-mail:
| 39 |
8
