manualshive.com logo in svg

Tansa LTT 303, User Manual

Discover the Tansa LTT 303, an exceptional device that simplifies your life with unparalleled functionality. Ensure seamless operation by accessing the comprehensive User Manual for free download from our website. Unleash the power of this product by understanding its capabilities and utilizing it to its fullest potential.

Share
Download
background image

                                                                                                                    

 

PRODUCT USAGE INSTRUCTIONS

 

 

 
 

6.2 Maintenance Instructions 

 

                 
                     

Take care not to have the turnstile switched on when performing the maintenance. 

 

 

•

 

Turnstile arms / wings should be cleaned regularly. Turnstile case and body should be cleaned 

regularly. 

•

 

Acidic  or  basic  chemicals  should  never  be  used  on  the  sheet  metal  surface  of  the  turnstile. 

Stainless maintenance spray should be used for all sheet metal surfaces. If you do not have any, 

please contact the producer company for supply. 

•

 

The  mechanism  should  be  cleaned  and  lubricated  periodically  every  six  months.  Molykote 

grease should be used for the lubrication of the mechanism. 

•

 

The shock absorber and brake settings of the mechanism should be checked and adjusted during 

maintenance. 

•

 

The inside of the turnstile should be wiped with dry cloth regularly and not exposed to dust. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 

 
 

| 36 |

 

Summary of Contents for LTT 303













































Reviews:

No comments

Related manuals for LTT 303

Brands by name

Popular brands

Load more brands