ELECTRICAL CONNECTIONS
5.3 Control card switch descriptions
Figure 5.3 Function switch
The functions of the on / off function switches (number 17 on the control card) seen in figure
5.3 above are as follows:
The switches are ON in Figure 5.3.
Automatic shutdown time:
It is determined by the switch 1 and switch 2. It is the waiting
time setting for the person to pass, corresponding to the "open" signal coming from the controller
to the turnstile. If the person passes just after the open signal, the waiting time is cancelled and the
turnstile is locked.
SWITCH 1
SWITCH 2
CLOSING TIME
ON
ON
20 seconds
(factory settings)
ON
OFF
10 seconds
OFF
ON
15 Seconds
OFF
OFF
5 Seconds
Passing direction control:
It is determined by the switch 3 and switch 4. One or both of the
desired directions of the turnstile designed for two-way controlled transition can be set to
continuous free pass mode. The guiding led in the direction of free pass will be green.
| 28 |
SWITCH 3 PASSING DIRECTION
ON
A direction controlled
(factory settings)
OFF
A direction free
SWITCH 4 PASSING DIRECTION
ON
B direction controlled
(factory settings)
OFF
B direction free
