Well set over the septic lid. Mark a hole inside this elongated slot to drill for colored carriage bolts to fasten down the well.
6.
Repeat step 6 for the remaining straps.
7.
Turn the straps slightly to the side to allow an area to drill on the marks you just made.
Using a drill, with a ¼ inch bit, drill the marks you made into the side of the well base
(these will be used to secure the base to the straps).
8.
Locate three 1 ¼ carriage bolts that match and are painted (included) and wing nuts
(included). Insert the carriage bolts through the well base inwards, bend the straps until
they line up with the carriage bolts. Put on wing nut and tighten firmly. Repeat for all
three straps.
Removing for maintenance
Remove the planters and set aside. Reach inside the base and remove the three wing nuts and
colored carriage bolts. Lift the TankTop Cover off, leaving the security hoop in place.
