The TankTop Cover conceals septic covers in your yard.
Made of polyethylene and recycled plastics, these products are designed to be an aesthetically
pleasing décor element to enhance your outdoor gardens.
Refer to this manual when prepping your area, assembling the planter base, wishing well and
securing everything in place.
It is recommended that more than one person assists with
putting together the product.
Supplies
Gather the following items to make prep work and assembly easier:
Shovel
Drill and ¼ drill bit
Tape measure
2 and ¾ hole saw recommended –
a regular hand saw will work too
7/16 open end wrench
BIK Inker/marker
The following items are included:
Template
Flat washers
Wing nuts
Stainless steel hoop with three assembly straps
Hex head bolts
Carriage bolts
Additional ideas to secure TankTop Cover products against tipping over
If you chose not to secure the product with the securement straps, the base can
be secured in other ways. Two 2x4 inch boards (not included) can be cut to 33
inches in length and laid across the bottom of the base. Next several bricks,
rocks or sandbags can be placed on top of the 2x4 inch boards to add weight.
If the planter base is in a permanent location, several inches of dirt can be
placed in the bottom also.
Septic Tank Introduction
