Tangent EVO E5A, Manual

Page: 8 / 116

8
Important information
Handling instructions
- The top and back panel of the unit may become warm after prolonged use. This is not
due to a defect.
- Turn off the power when the unit is not used.
Protect the power cord
- Follow the instructions below to prevent abnormal operation, electrical shock, fire or
personal injury:
- Hold the plug firmly when inserting it into the socket.
- Avoid heat-producing devices.
- Do not place objects on the power cord.
- Do not carry out service work on or change the power cord.
Positioning
Do not place the unit in any of the fol. places:
- In sunlight, close to heat-producing devices or in an enclosed rack.
- In places with high temperatures (40C or more) or high relative humidity (90% or
more).
- In dirty places as some internal parts may be damaged.
Do not put your fingers or any other objects into the unit
- Touching the internal parts is dangerous and may cause injury or damage. Do not
open the cabinet.
- Do not place any foreign matter in the unit.
Interference
Placing the unit near a television set, radio or video player may cause poor picture and
sound quality. In that case, move the unit further away from the television set, radio or video
player.
Condensation
Condensation may occur in the following cases:
-
When the unit is moved directly from a cold to a warm place.
- When the unit is used in a room where the radiator has just been switched on or a
place where the cold air from the air-conditioning system is directed at the unit.
- If the unit is used in the summer in a warm and humid room just after it has been
moved from an air-conditioned room.
- If there is steam or a high level of humidity in the room.
In case of condensation, the unit will not work properly. Turn off the unit. Unplug the unit
and leave it for 2-3 hours. The unit will then have adapted to the environment and any
condensation will have disappeared.