T&D EADS THR880i User Manual Download Page 20

Page: 20 / 125

G e t t i n g s t a r t e d

Charge the battery

1. Connect the lead from the charger

to the bottom of your radio.

2. Connect the charger to an AC wall

outlet. The battery indicator bar
starts to scroll.

Charging

is briefly

displayed if the radio is switched on.
You can use the radio while
charging.

If the battery is completely empty, it
may take a few minutes before the charging indication appears
on the display, or any calls can be made.

3. The battery is fully charged when the battery indicator bar stops

scrolling, and

Battery full

is briefly displayed if the radio is

switched on.

Not charging

is displayed, charging has been suspended. Wait for

a while, disconnect the charger, plug it in again, and retry. If
charging still fails, contact your dealer.

Note:

Never charge the THR880i Ex inside an Ex area. For more

information, see the THR880i Ex Safety Instructions leaflet.

Switch the radio on and off

1. Press and hold

to switch the radio on and off. If the

, switching the radio off returns the

level to

Normal

. See Security settings on page 98.

2. If the radio asks for a phone code, enter the four-digit phone code

(displayed as ****), and press

3. If the radio asks for a security code, enter the five-digit security

code (displayed as *****), and press

For more information, see Access codes on page 14.

Your radio has an external antenna.

THR880i_Rel6_en_print.book Page 20 Jeudi, 20. novembre 2008 2:13 14

Summary of Contents for EADS THR880i






























































































































Search results

Summary of Contents for EADS THR880i

Reviews:

Related manuals for EADS THR880i

Brands by name

Popular brands

T&D EADS THR880i, User Manual

Search results

Summary of Contents for EADS THR880i

Reviews:

Related manuals for EADS THR880i

Brands by name

Popular brands