Options and Upgrades
Reference Guide: Voyager E5784 and E5788 HD DSNG Encoder
Page 3-9
ST.RE.E10137.3
AES x Connector
Connect the audio input cables to the appropriate AES input
connectors.
Each connector accepts a single stereo pair. They may be independently
configured or form part of an multi-channel input.
AES REF Connector
This connector allows the connection of a 27 MHz studio
timing reference.
Table 3.4: Audio In Connector
Pin
Signal
Pin
Signal
Analogue
Digital
Analogue
Digital
1
Left Channel A (+)
AES/EBU (A) (+)
9
Left Channel A (-)
AES/EBU (A) (-)
2
Not connected
10
Right Channel A (+)
3
Right Channel A (-)
11
Not connected
4
Left Channel B (+)
AES/EBU (B) (+)
12
Left Channel B (-)
AES/EBU (B) (-)
5
Not connected
13
Right Channel B (+)
6
Right Channel B (-)
14
Not connected
7
AES/EBU
Reference (Output
Signal)
15
AES/EBU
Reference (Ground)
8 Not
connected
NOTES…
1.
In analogue mode termination is either 20 k
Ω
or 600
Ω
.
2.
In AES/EBU mode termination is 110
Ω
(default).
3.
When the Encoder is powered down the digital channel is selected with 110
Ω
termination.
4.
The digital audio input does not support SPDIF.
CAUTION…
To ensure EMC compliance, use the audio connector supplied with the Encoder.
