Options and Upgrades
Reference Guide: Voyager E5784 and E5788 HD DSNG Encoder
Page 3-7
ST.RE.E10137.3
See Table 3.1 for the slots that it can be installed in.
Audio In Connector
Connect the audio cable to the AUDIO IN
connector. The 15-way, D-type male connector
is used in different ways according to the audio
input and the encoding configuration selected.
The connector provides two stereo pairs. They may be independently
configured as either analogue or digital. The left channel is used to input
digital audio.
Table 3.3: Audio In Connector
Pin
Signal
Pin
Signal
Analogue
Digital
Analogue
Digital
1
Left Channel A (+)
AES/EBU (A) (+)
9
Left Channel A (-)
AES/EBU (A) (-)
2
Not connected
10
Right Channel A (+)
3
Right Channel A (-)
11
Not connected
4
Left Channel B (+)
AES/EBU (B) (+)
12
Left Channel B (-)
AES/EBU (B) (-)
5
Not connected
13
Right Channel B (+)
6
Right Channel B (-)
14
Not connected
7
AES/EBU
Reference (Output
Signal)
15
AES/EBU
Reference (Ground)
8 Not
connected
NOTES…
1.
In analogue mode termination is either 20 k
Ω
or 600
Ω
.
2.
In AES/EBU mode termination is 110
Ω
(default).
3.
When the Encoder is powered down the digital channel is selected with 110
Ω
termination.
4.
The digital audio input does not support SPDIF.
CAUTION…
To ensure EMC compliance, use the audio connector supplied with the Encoder.