Operating the Equipment Locally: Remux
Page 4-140
Reference Guide: Voyager E5784 and E5788 HD DSNG Encoder
ST.RE.E10137.3
This option enables the minor channel to be specified.
Logical Channel Option
This option enables a number to be given to the Logical Channel.
CA Input Option
NOTE…
This option is only shown if there are incoming services.
This option indicates the type of CA present on the input. It is set for
status only and cannot be changed.
BISS Key Code Option
NOTE…
This option is not available from Build version 2.2.
This option enables the scrambling key used in BISS scrambling mode to
be set. The same scrambling code must be used at the receive end to
unscramble the transmission.
Enter up to 12 digits. If less then seven digits are entered, they are
prefixed with 0s (zero) to give a seven-digit code.
Enc Session Word Option
Refer to Enc Session Word Option on page 4-123 for details.
Session Word Option
Refer to Session Word Option on page 4-123 for details.
PMT PID Option
NOTE…
This option is status only for the Host Encoder but can be changed for incoming services.
This option shows the Program Map Table Packet Identifier.
Table 4.181: PMT PID Options
Selected Option
Description
Min: 32
Max: 8190 (1FFEh)
Step Size: 1
Program Map Table Packet
Identifier (PMT PID).
PCR PID Option
NOTE…
This option is status only for the Host Encoder but can be changed for incoming services.
This option shows the Program Clock Reference Packet Identifier.