TANDBERG TT-1222, Reference Manual

Page: 130 / 132

Alarm Categories and Conditions
Page D-6 Reference Guide: TT1222 4:2:0 Professional Receiver
ST.RE.TT1222.2
D.3.4 Data Output Alarms
The data output alarms reflect the status of the LS data (RS-232) output
port and its associated functions.
Table D.6: Data Output Alarm Categories and Conditions
Alarm Category Contents
Alarm Description Remedy Default
Error in
stream Cannot decode the
component stream. Make sure the
correct component
is selected A
CC failure TS has missing packets on
the incoming transport
stream. Improve input
signals, or check
source W
Buffer
overflow Output port rate is lower than
incoming data rate. Increase output rate
or select new
component A
Not used No PID selected to decode. Select PID or turn of
data output A
Data output:
Same PID The selected PID is in use by
another part of the Decoder. Choose a different
PID. W
D.4 CA and PSI/SI Related Errors
D.4.1 CA Related Alarms
The CA status alarms indicate the current condition of the CA system
Table D.7: CA Related Alarm Categories and Conditions
Alarm Category Contents
Alarm Description Remedy Default
CA system:
No access The DVB common interface
module has no access to the
currently selected
component. Check conditional
access entitlements
with service
provider. W