TANDBERG TT-1222, Reference Manual

Page: 118 / 132

Front Panel LCD Menus
Page C-30 Reference Guide: TT1222 4:2:0 Professional Receiver
ST.RE.TT1222.2
Menu title: STAT:ALARM Description Section
DVB Subt Enters the DVB Subtitle alarm status submenu Annex D
Audio1 Enters the Audio 1 alarm status submenu Annex D
Audio2 Enters the Audio 2 alarm status submenu Annex D
Data Enters the Data alarm status submenu Annex D
Config Enters the Config alarm status submenu Annex D
For information regarding the alarms and their individual interpretations,
refer to Annex D, Alarm Categories and Conditions.
C.6.3 GPO Status Menu
This menu shows the current state of all the GPOs.
Table C.44: GPO Status Menus
Menu title: STAT:GPO Description Section
GPO 1: Status can be high or low.
High – One or more events are triggering the GPO.
Low – No events are triggering the GPO. ----
GPO 2: Status can be high or low.
High – One or more events are triggering the GPO.
Low – No events are triggering the GPO. ----
GPO 3: Status can be high or low.
High – One or more events are triggering the GPO.
Low – No events are triggering the GPO. ----
GPO 4: Status can be high or low.
High – One or more events are triggering the GPO.
Low – No events are triggering the GPO. ----
GPO 5: Status can be high or low.
High – One or more events are triggering the GPO.
Low – No events are triggering the GPO. ----
Further menus from this one indicate which events are triggering the
GPOs.
It will show one of the following:
No Setup – This means the GPO is not set up to trigger on any
events.
No Trigger – The GPO is set up to trigger on one or more events but
the events are not occurring.
<a list of one or more triggers> - This is the list of events which
are currently triggering the GPO.
C.6.4 Input Status Menu
The input status menu provides information regarding the quality of the
input signal. The information provided will depend on what input module is
fitted inside the receiver.