TANDBERG T2000 MXP, User Manual

Page: 163 / 261

Administrator Settings
153
4.5.4 Stereo Settings
Stereo Input Mode (stereo audio)
If Stereo Input mode is on, Audio in 3 and 4 (VCR Left/Right) will behave as a stereo input pair.
The VCR Ducking and AGC setting for VCR will in this case apply to both Audio in 3 and 4.
Audio out to the left loudspeaker will be a mix of Audio in 3 (VCR Left) the far end signal (left or
mono), and Audio out to the right loudspeaker will be a mix of Audio in 4 (VCR Right) and the far
end signal (right or mono).
If Stereo Input Mode is off, Audio out to both loudspeakers will be a mix of Audio in 3 and 4 and
the far end (mono or left+right).
If the system is connected to a Digital NAM, stereo sound on the loudspeakers shall be
present if a stereo input signal is connected to the inputs VCR-Left and VCR-Right or a stereo
signal is received from the Far End.
If the system is not connected to a Digital NAM, stereo sound on the loudspeaker outputs
will be present in the following situations:

If system is idle and a stereo input signal is connected to the inputs VCR-Left and
VCR-Right.

If system is in a call with mic off and a stereo input signal is connected to the inputs
VCR-Left and VCR-Right, or a stereo signal is received from the Far End.

Otherwise the Loudspeaker Left signal will be equal to Loudspeaker Right.