65
D13898.06
MAY 2008
TANDBERG
CONTENT SERVER
ADMINISTRATOR GUIDE
Live Multicast Streaming Settings (streaming on a dynamically assigned IP address)
Configuring Windows Media Streaming Server
Before you can start delivering your live
content as a multicast stream on a dynamically
assigned IP address you need to:
Check the TCSmulticastTemplate publishing
1.
point and verify that the IP address under
Destination multicast IP address and port is
correct (or modify it if necessary).
Configure a multicast delivery server.
2.
Once you have done that, you must add the
multicast delivery server to your template in
order to start using it.
Check the TCSmulticastTemplate publishing point
Remote Desktop into your Content Server and choose
1.
Manage Your Server
from the
Start Menu
Click on
2.
Manage this streaming media server
Expand the list next to the name
of your streaming media server, then expand the list of
Publishing Points
Select the
3.
TCSmulticastTemplate Publishing Point
and click on the
Properties
tab.
Select
4.
Category Multicast streaming
Right-click on
5.
WMS Multicast Data Writer
and select
Properties
from the drop-
down menu.
Verify that the
6.
IP address
under
Destination multicast IP address and port
is
correct and modify it if necessary.
Configure a multicast delivery server
Go to
Administrator Settings
>
Media Servers
to add a Windows
Media Streaming Server and configure it as follows:
Enter a descriptive name for the server
•
Enter ‘(local)’ in the Address field
•
Select
•
Support Live Streaming
Select
•
Server push
Enter
•
8080
in the
Port
field
Publishing Points
•
: Select
Create new using settings from
existing
and enter
TCSmulticastTemplate
in the
Main
and
Dual
fields
Live URLs:
•
Select
•
Use alternate live URLs
and enter
http://(local)/tcs/data
in the
Main
and
Dual
fields.
Select the checkboxes to have file names appended to the
•
URL
