TANDBERG S3.1, Administrator'S Manual

Page: 37 / 131

37
D13898.06
MAY 2008
TANDBERG CONTENT SERVER
ADMINISTRATOR GUIDE
Table of
Contents
Introduction Installation Quick Setup
TCS
Administration
Backing up and
Restoring
Administrator
Settings
Conference
Setup
View
Conferences
Appendices
Site Settings
Administ rators need to review configuration
information in the Site Settings menu to ensure
that the system is configured properly for their
installation site.
All changes made in the
Site Settings page
need to be confirmed by clicking the Save
button at the top or bottom of the page.
Site Settings contain:
System Information
•
Gatekeeper Settings
•
Advanced H.323 Settings
•
SIP Settings
•
Authentication
•
API
•
User Properties
•
System Defaults
•
These are described on the following pages.
About Site Settings The Site Settings options
If the TANDBERG Content Service is recording
calls at the time, the site setting
interface
will indicate this and all site settings will be
disabled except for the
Restart Service button.
If you click on the Restart Service button while
the Content Server is in call, the following
message will be displayed:
If you restart the Content Server service, calls
which are currently in progress will fail. Are
you sure you want to restart?
Restart Service will terminate calls that are
currently live (that is, the calls will be ended
and conferences will not be available for on
demand playback).
If the Content Server is in a call, the
administrator is unable to edit the
current site settings. The
Site Settings
page will contain the text:
Cannot edit Site Settings—Content Server is
currently in a call.
!
The + indicates that this topic is
expandable in the usual way. Once
expanded, the sign changes to – to show
that the topic can be collapsed again.
See System Information section.
See Gatekeeper Settings section.
See Advanced H.323 Settings section.
See SIP Settings section.
See Authentication section.
See API section.
See User Properties section.
See System Defaults section.