Installing the Equipment
Page 2-6
Reference Guide: evolution 5000 E5780 and E5782 Encoder
ST.RE.E10135.4
Figure 2.2: Air Path Through the Enclosure
2.4
A.C. Mains Operating Voltage and Earthing
2.4.1
A.C. Power Supply
CAUTION...
This product should be operated only from the type of power source indicated on the marking label. If
you are not sure of the type of power supply to your business, consult a qualified electrical engineer or
your local power company.
See
Annex B, Technical Specification
for a full power supply specification. There are no links
or switches to be altered for operation from different a.c. supplies.
2.4.2
Power Cable and Earthing
General
Check that the a.c. power cable is suitable for the country in which the Encoder is to be used.
WARNINGS...
1.
IF THE MOULDED PLUG FITTED TO THE MAINS CABLE SUPPLIED WITH THIS UNIT IS NOT
REQUIRED, PLEASE DISPOSE OF IT SAFELY. FAILURE TO DO THIS MAY ENDANGER LIFE
AS LIVE ENDS MAY BE EXPOSED IF THE REMOVED PLUG IS INSERTED INTO A MAINS
OUTLET.
2.
POWER SUPPLY CORDS SHOULD BE ROUTED SO THAT THEY ARE NOT LIKELY TO BE
WALKED ON OR PINCHED BY ITEMS PLACED UPON OR AGAINST THEM, PAYING
PARTICULAR ATTENTION TO CORDS AT PLUGS, CONVENIENCE RECEPTACLES, AND
THE POINT WHERE THEY EXIT FROM THE APPLIANCE.
The unit is supplied with three, detachable mains-supply cables fitted with moulded plugs
suitable for the USA, UK or Europe.
The wires in the mains cable are coloured in accordance with the wire colour code shown in
Warm air out
Cool air in
(front – via bottom vent)
Cool air in
