Operating the Equipment Locally — ATM Network Interface Option Module Menu
Page 4-86
Reference Guide: evolution 5000 E5780 and E5782 Encoder
ST.RE.E10135.4
4.10.7
Delete Profile Menu
The Delete Profile option lists the current active profiles. Select a Profile by pressing the
associated softkey, select Delete and press the Enter softkey.
4.10.8
Edit Profile Option
Press the associated softkey to edit the selected Profile.
Further screens appear which are the same as those on page 4-85.
The Profile parameters available change according to VC Type (see
Figure 4.15 on page 4-84).
4.10.9
Add/Edit Authorisation Menu
This authorises an ATM address from which SVC connections will be accepted. Press the
Auth softkey. Change the option to ‘Active’ and press the Enter softkey.
Table 4.38: Add Authorisation Options
Selected Option
Description
Active
A new default Authorisation is created, and the menu moves directly to the Edit screen for the
new Authorisation.
Not Active
A new default Authorisation is not created.
NOTE…
If Incoming Calls is set to Authorisations then any incoming connection requests from ATM
addresses which are not in the authorisations list will be rejected.
Table 4.39: Edit Authorisation Options
Selected Option
Description
Authorisation Name
Change the name and press the Enter softkey.
ATM Address
Change the ATM address and press the Enter softkey.
4.10.10
Delete Authorisation Menu
The
Delete Authorisation Menu
lists the current Authorisations. Select an authorisation
by pressing the associated softkey. Change to ‘Delete’ and press the Enter softkey.
Table 4.40: Delete Authorisation Options
Selected Option
Description
Retain Keeps
the
authorisation.
Delete Deletes
the
authorisation.
