TANDBERG E5714 DSNG Voyager, Reference Manual

Page: 98 / 314

Operating the Equipment Locally — System Menu Service Info Menu (Syntax = ATSC)
Page 4-20 Reference Guide: E57xx DSNG and DENG Voyager Encoder
ST.RE.E10076.3
Ext. PSIP Source Option
This option only applies if the SI level has been set to On (Ext. PSIP). It
specifies the Remux input through which the external PSIP is to be
received.
PSIP Status
This option only applies if the SI level has been set to On (Ext. PSIP). It
reports the range of PIDs that will be passed through the external PSIP
input.
PSIP Min PID
This option only applies if the SI level has been set to On (Ext. PSIP). This
sets the minimum PID value that will be passed through the external PSIP
input.
PSIP Max PID
This option only applies if the SI level has been set to On (Ext. PSIP). This
sets the maximum PID value that will be passed through the external PSIP
input.
Major Channel Option
This is associated with the field major_channel_number and is used to
group all channels that are to be identified as belonging to a particular
broadcast corporation.
Minor Channel Option
This is associated with the field minor_channel_number and is used to
identify a particular channel within the major_channel_number group of
channels.
Program Number Option
This enables the Program Number to be specified. In ATSC this is used as
the basis of the PMT PID (same as Service ID in DVB). The information is
included in the Program Association Table (PAT), Program Map Table (PMT)
and VCT.
NOTE…
This option is not displayed if the unit is set to generate PSIP externally or it is under MEM control.
Service Type Option
The Service Type identifies the type of service carried in this virtual
channel. The options are; Analog TV, ATSC Digital TV, ATSC Audio only,
and ATSC Data Broadcast.
Transport Stream Id Option
This sets the Transport Stream ID value for the transport stream output
from the Encoder.