TANDBERG E5714 DSNG Voyager, Reference Manual

Page: 35 / 314

Installing the Equipment
Reference Guide: E57xx DSNG and DENG Voyager Encoder Page 2-11
ST.RE.E10076.3
2.6 Signal Connections For the Basic Unit
2.6.1 Introduction
All signal connectors are located at the rear panel of the Encoder. For a
detailed interface specification see Annex B, Technical Specification.
Always use the specified cables supplied for signal integrity and compliance
with EMC requirements (see Annex B, Technical Specification).
Figure 2.4: E5714 (1U) Rear Panel Component Parts and Connectors
Figure 2.5: E5740-IF (2U) Rear Panel Component Parts and Connectors
Option Slot 2
Audio In
and
Audio Reference Out
H Sync Composite
Video
ASI Outputs
Ethernet RS-232
Data
RS-422
Data
Alarm RS-232/ RS-485
Remote Control
SDI In
Base Board
Technical Earth
IF Out Main
IF Out Monitor
Technical
Earth
Option Slot 1
Option Slot 4
Option Slot 5 Option Slot 6
Option Slot 1
Audio In
and
Audio Reference Out
Composite
Video
ASI
Outputs
Alarm
RS-232/RS-485
Remote Control
SDI In Ethernet
Option Slots 4-6
Base Board
IF Out
Main
IF Out
Monitor
TANDBERG
Television use
only
H Sync
RS-232
Data
RS-422
Data