TANDBERG E5714 DSNG Voyager, Reference Manual, Page: 106 / 314

Operating the Equipment Locally — System Menu General Menu
Page 4-28 Reference Guide: E57xx DSNG and DENG Voyager Encoder
ST.RE.E10076.3
Table 4.11: Fan Control Options
Selected Option Description
Auto (Temp. control) The fans are activated automatically when a defined temperature is reached.
On The fans are activated all the time.
4.7.6 Time and Date
This option sets the local time and date. In ATSC, daylight saving time can
be set.
4.7.7 Advanced Menu
Overview
The
Advanced Menu
is selected from the
System Menu
by pressing the
Advanced softkey. This menu provides options for the advanced
parameters of the Encoder. See Figure 4.9 for the
Advanced Menu
structure.
Setup Password Option
This option is only available from the front panel. If the Setup Password
option is set to On then a password is required to change any parameters.
Current Password Option
This option is only available from the front panel and allows the current
password to be changed.
NOTE…
For forgotten passwords, contact Customer Services.
Display Errors Option
This option either enables or disables the display of error or alarm
messages on the front panel.
System Control Option
This option enables the type of system control specified in the SI to be set.
Table 4.12: System Control Options
Selected Option Description
MEM Control of the video/audio delay (lip sync) is via the MEM.
Local Control of the video/audio delay (lip sync) is within the Encoder
2
.
External (SNMP) Control of the video/audio delay (lip sync) is via the SNMP protocol.
2
To ensure correct lip sync when working with linear or pre-encoded audio, the option card M2/EOM2/AUDLIN2 should
be used.