Copyright © TANDBERG 2008
Reference Guide Version 3.0 rev 3.0
10
The "log" array consists of structures which contain the following fields.
Field
Type
Comments
time dateTime.iso8601 The time of the last reboot.
reason
String
The reason for the reboot (one of
unknown
,
User
requested shutdown
or
User requested
upgrade
).
3.5
gatekeeper.query
Retrieves the gatekeeper settings and current status for an MCU or IP VCR. Takes no parameters.
Response
Type
Comments
gatekeeperUsage String
One
of
disabled
,
enabled
or
required
.
The following parameters are all optional and will only be present if gatekeeperUsage is not
disabled.
address
String
The address of the gatekeeper.
dnsStatus
String
The status of the DNS resolution: one of
inProgress
,
resolved
or
failed
.
ip
String
If the dnsStatus is
resolved
, contains the IP
address of the gatekeeper.
activeRegistrations
Integer
The number of active registration.
pendingRegistrations
Integer
The number of registrations in progress.
registrationPrefix
String
The registration prefix used by the device
h323ID
String
The h323 id used by the device.
mcuServicePrefix
String
The service prefix used by the device.
scheduledConferenceIDRegistration String
The value enabled or disabled; corresponds
to web interface "ID registration for
scheduled conferences" option.
This field is only present for MCU product
types, and only for MCU software versions
2.2(1.3) onwards.
h323IDStatus
String
mcuServicePrefixStatus
String
The current status of the ID/service prefix
registration process. One of
idle
,
registering
,
registered
,
deregistering
,
pendingReregistration
,
waitingRetry
,
noID
or
idTooLong
.
3.6
sip.query
Retrieves information on SIP configuration for an MCU or IP VCR. Takes no parameters.
Response
Type
Comments
configuredRegistrar
String
The currently configured SIP registrar
address. This corresponds to the “SIP
registrar address” on the
Settings >SIP
web page, and will be an empty string value
if there is no currently configured SIP
registrar.
configuredProxy String
The
currently configured SIP proxy address.
This corresponds to the “SIP proxy address”
on the
Settings > SIP
web page, and will
be an empty string value if there is no
