D14128.03—JULY 2009
18
Codec C90
System Integrator Guide
Contents
Introduction
Getting Started
Interfaces
About the API
xConfiguration
xCommand
xStatus
Cameras
Appendices
Contact us
Codec C90 Rear Panel
Audio sockets
Video sockets
Network
interface
sockets
Power
socket
Power
switch
COM Port,
Camera
Control
Audio sockets
Video sockets
GPIO and USB
Rear panel sockets
overview
The TANDBERG Codec C90 offers a great flexibility
in connecting audio and video equipment to the
system.
The illustration below shows the rear panel of the
TANDBERG Codec C90.
Video sockets
The video input sockets are:
4xHDMI
4xHD-SDI
2xDVI-I
2xAnalog Component (Y-Pr-Pb)
1xComposite or 1xS-Video(YC)
The video output sockets are:
2xHDMI
2xDVI-I
1 Composite
Audio sockets
The audio input sockets are:
8xXLR Female - Microphone/Line In
4xRCA - Line In (1 Left, 2 Right, 3 Left, 4 Right)
2xHDMI
The audio output sockets are:
2xXLR Male - Line Out
4xRCA - 1 Left (SPDIF), 2 Right, 3 Left (SPDIF),
4 Right
2xHDMI
Other sockets
The other sockets are:
Ethernet 1 and Ethernet 2
*
COM - Serial data port
Camera control - Serial port for camera control
Power socket
Grounding - Chassis grounding
Power On/Off switch
GPIO*, USB Host*, USB Device*, T Link*
The following pages gives a detailed description of the rear panel sockets and connectors.
Inputs
Outputs
TANDBERG Basic
Setup
1
1
The main connectors
for TANDBERG basic
setup are highlighted
in
orange
.
*
For future use
T Link
Contents
Introduction
Getting started
Interfaces
About the API
xConfiguration
xCommand
xStatus
Cameras
Appendices
Contact us
Interfaces
