manualshive.com logo in svg

TANDBERG Codec C90, Codec C60, Codec C40, Administration Manual

Share
Download
TANDBERG Codec C90, Codec C60, Codec C40 Administration Manual Download Page 37

D14637.01—MARCH 2010 

37

TANDBERG Quick Set C20/C20 Plus and Profiles using C20

Administrator guide

Contents

Introduction

Advanced configuration

Password protection

About monitors

Appendices

Contact us

www.tandberg.com

Codec C20–The physical interface

The front panel LEDs

The LED in front of the codec indicates the status of the codec.

• 

When the LED is 

OFF

 the codec is Off.

• 

The LED 

flashes

 

green

 during the boot up and shut down of 

the codec.

• 

The LED 

pulses

 

green

 when the infrared (IR) port is activated. 

This will occur when the remote control is in use.

• 

The LED is 

steady

 

green

 when the codec is On, in Standby 

mode or in Presentation mode.

• 

When the LED is 

red

 this indicates an Error has occurred.

Power     Call 

              IR           Alarm

 

 

        (infrared)

Contact us

Contents

Introduction

Advanced configuration

Password protection

About monitors

Appendices

Appendices

Summary of Contents for Codec C90, Codec C60, Codec C40


















































Reviews:

No comments

Brands by name

Popular brands

Load more brands