background image

D13841.08
10.2007

12

Table of 

Contents

Trademarks & 

Copyright

Patents & 

Disclaimers

Safety/ 

Environmental

To Get You  

Up and Going

Using the 3G 

Gateway

Viewing the 

System Status

Configuring  

the 3G Gateway

Maintenance  

& Upgrade

Services

Dial Plan 

Examples

Contact 

Information

To Get You  

up and Going

TANDBERG 

3G GATEWAY 

USER GUIDE

3G Gateway Features at a Glance

IP Services and Procedures

H.324m, SIP and H.323 support

• 

Service Prefix

• 

Load balance.

• 

UMTS Services

The TANDBERG 3G Gateway offers a variety of UMTS dial-in 
services:

Direct Inward Dialing (DID) – the destination endpoint is 

• 

determined from the dialled number

Interactive Video Response (IVR) – the destination endpoint 

• 

can be selected via touch tones.

TMS Corporate Directory – the destination end point can be 

• 

selected via a search in a TMS phonebook.

Security

Secure Access - support XML/SOAP over HTTPS, Web (HTTP) 

• 

encrypted password and the services that can be disabled.

Video Quality

H.263 video compression.

• 

MPEG-4 video compression

• 

Audio Quality

AMR, G.711 audio compression

• 

Support AMR bit rate 4.75 Kbit – 12.2 Kbit.

• 

Interoperability

Worldwide compatibility with standards-based 

• 

videoconferencing systems

Compatible with all available WCDMA H.324M video telephony 

• 

capable handsets supporting DTMF tones.

Management Interfaces

SOAP

 (Simple Object Access Protocol) is a lightweight protocol 

for exchange of information in a decentralized, distributed 
environment.

XML

 (Extensible Markup Language) is a flexible way to create 

common information formats and share both the format and 
the data on the World Wide Web, intranets, and elsewhere. 
This functionality can be used by management systems like the 
TANDBERG Management Suite to control the 3G Gateway

HTTP

 Web-interface for system management, call management 

such as diagnostics and software uploads

HTTPS

 Hypertext Transfer Protocol over Secure Socket Layer is 

a Web protocol that encrypts and decrypts user page requests 
as well as the pages that are returned by the Web server. It uses 
Secure Socket Layer (SSL) as a sublayer under its regular HTTP 
application layering. HTTPS uses port 443 instead of HTTP port 
80 in its interactions with the lower layer, TCP/IP. SSL uses a 
40-bit key size for the RC4 stream encryption algorithm, which 
is considered an adequate degree of encryption for commercial 
exchange.

Network and Features

Call rate of 64 kbit on ISDN side and 768 kbps on IP side for 

• 

each call is supported through the 3G Gateway. 

Interactive Video and voice Response (IVR).

• 

Default 3G Gateway service when calling Border Controller IP 

• 

number 

Support voice only calls (VoIP gatewaying)

• 

Video IVR 

Selecting IP endpoint from address book.

• 

The TANDBERG 3G Gateway enables sites on IP and UMTS 
Handsets to participate in meetings with each other with the 
quality and reliability found in all TANDBERG equipment. An 3G 
Gateway system opens up a wide range of interactive video and 
call routing services.

Due to the fixed bandwidth of UMTS video telephony every 
call will be limited to 64 Kbits/s. This offers a capacity of 30 
simultaneous calls through an E1 PRI, 23 simultaneous calls 
through a T1 PRI, or 8 calls through a 4 × BRI. Due to audio 
transcoding (AMR to G.711) the bandwidth at IP side is 109 
Kbits/s per session, 64 Kbits/s G.711 audio and 45 Kbits/s 
H.263 video calling 3G to H.323 or SIP endpoints. For calls 
between H.323 endpoints it is possible to set up 60 sessions 
between 768 and 192 kbit.

Features Highlights

About the 3G Gateway

3G Gateway Capacity – Typical Scenarios

Summary of Contents for 3G GATEWAY 1























































Reviews: