D13841.08
10.2007
38
TANDBERG
3G Gateway
USER GUIDE
TANDBERG
3G GATEWAY
USER GUIDE
Location.
Used to identify system location
via SNMP tools such as HPOpenView or
TANDBERG Management Suite.
Select
SNMP
to access the
SNMP Configuration
pane.
Save.
Press
Save
to activate
new settings.
The SNMP Community name is case
sensitive!
SNMP
(Simple Network
Management Protocol)
is used for monitoring
and configuring different
units in a network. The 3G
Gateway’s SNMP Agent
responds to requests from
SNMP Managers (a PC
program etc.). SNMP traps
are generated by the agent
to inform the manager about
important events.
SNMP Mode.
The SNMP operation modus can
be set to:
On
•
. Turns SNMP On
Off
•
. Turns SNMP Off
ReadOnly
•
. Do not send SNMP information
to the host
TrapsOnly
•
. Only send SNMP information
identified as TRAPS to the host.
SNMP Community name.
SNMP Community
names are used to authenticate SNMP
requests. SNMP requests must have this
‘password’ in order to receive a response from
the SNMP agent in the 3G Gateway.
System contact.
Used to identify the system
contact via SNMP tools such as HPOpenView
or TANDBERG Management Suite.
SNMP Configuration
Host IP Address
(
1
,
2
and
3
). Identifies the
IP-address of the SNMP manager. Up to three
different SNMP Trap Hosts can be defined.
Your LAN administrator should provide the
correct values for these fields.
